Archive for category Sidebar Menu

StruCalc 8.0 is the next generation of structural analysis software. The intuitive interface combined with the power to design multiple span members using steel, wood, flitch beams or manufactured lumber propels StruCalc ahead of the competition.

This is the features page for StruCalc 7.0, a now outdated version of our software. To see what StruCalc 8.0 looks like please go to our homepage and follow the links from there.

Feel free to browse any of our detailed information pages by following the below links:

• Hip/Valley Beams
• Cantilever Columns
• Column Design

Features for StruCalc 7.0

• Steel Angle design-braced or unbraced with leg up or down.
• Cantilever column design
• Fully customizable database-add or remove materials and control what sizes appear in StruCalc
• Round member design
• Multi-span I-joist design
• 2006 building codes
• 2005 NDS values
• 2005 AISC Steel values

Minor New StruCalc 7.0 Features

• Loading diagram now scales to show relative load strengths.
• Added Two partially distributed loads to the column module
• Added a second wall load to the floor joist module
• Can now change the building code for an entire project
• Autosize by double clicking on the desired value
• multiple steel plates for Flitch beam design
• Button to clear all inputs in the multi-loaded beam module
• Copy Autosize options to Notes at end of Calculations
• Set default grades or steel shapes

StruCalc Features

• Includes Ten Design Modules
  • Footing (Square, rectangular, and Continuous)
  • Uniformly Loaded Floor Beam
  • Roof Beam (Including Hip Beams)
  • Combination Roof and Floor Beam
  • Multi-Loaded Beam
  • Multi-Span Floor Beam
  • Multi-Span Roof Beam
  • Floor Joist
  • Roof Rafter
  • Column
• Multiple Span Analysis with Increased Loading Options
  • Up to three spans with cantilevered ends
  • Six point loads per span
  • Four trapezoidal loads per span
  • One uniform live and dead load per span
• Rectangular and continuous footing design
  • Sizes and specifies reinforcement
  • Load calculator assists in load determination
  • Specify column type (Steel, wood, concrete or masonry)
  • Design for overburden pressure
• Laterally loaded column design
  • Stud wall design
  • cantilever column design
  • Structural Composite lumber columns
  • Deflection criteria for laterally loaded columns
  • Design for vertical and lateral loads
  • Up to three lateral point loads
  • One lateral uniform load
  • Multiple laminated solid sawn columns
• Multi-span Hip beam design
• Shear, moment, and deflection diagrams
  • View diagrams for all load cases
  • Determine values at any point along a beam
• Negative loads
• Improved loading diagram
• Tube steel beams in all beam modules
• Wide flange steel columns
• User notes on print-outs
• Built in translator to open StruCalc 5.0 files
• Comprehensive Material Database
  • Solid Sawn lumber from the 91, 97, 01 and 05 NDS
  • All Available Glulam Combinations including new NDS Stress Class’s
  • Structural Composite Lumber from six Manufacturers
  • Wide Flange Steel beams and Columns (five shapes)
  • Equal Leg Single Angle design
  • Tube Steel Beams and Columns
  • I-Joists from six Manufacturers
  • Flitch beam design with solid sawn or structural composite side members
• All major Building codes
  • Use any year NDS with any Building Code
  • 2006 International Building Code
  • 2006 International Residential Code
  • 2003 International Building Code
  • 2003 International Residential Code
  • 2001 California Building Code
  • 2000 International Building Code
  • 2000 International Residential Code
  • 98 International One and Two Family Dwelling Code
  • 94 and 97 Uniform Building Code
  • 94, 97, and 99 Standard Building Code
  • 93, 96, and 99 BOCA National Building Code
  • 95 CABO One and Two Family Dwelling Code

• Generic Design Abilities
  • Design beams, columns, joists, and concrete footings
  • Choose materials, species, grades and sizes from vast database
  • Easily bring up tables of stress values for groups of design materials
  • Input your own custom values and materials to design with!
  • Set deflection criteria’s, duration factors, and notch depth’s
  • Use our auto-sizer to quickly view multiple design solutions
  • View loading and shear, moment, deflection diagrams of your designs
  • Apply area reduction in floor design modules
  • Apply snow loads in roof design modules
  • Quickly print, save, and email using .pdf’s
• Building Codes
  • 2006 International Building Code
  • 2007 California Building Code
  • 2005 National Design Specification
  • Plus 15 Legacy Building Codes!
• Design Modules
  • Uniformly Loaded Floor Beam
  • Simple span floor beam with one uniform load
• Roof Beam
  • Simple span roof beam
• Combination Roof & Floor Beam
  • Simple span beam with roof and floor loads
• Multi-Loaded Multi-Span Beam
  • Input up to 3 spans, with 2 cantilever
  • Add 6 point loads, and 4 trapezoidal loads per span
  • Use the trap load wizard to add quickly add multi-span loads and auto calculate interior reaction loads
• Multi-Span Floor Beam
  • Up to 3 spans with 2 cantilevers
  • One point load per span
• Multi-Span Roof Beam
  • Up to 3 spans with 2 cantilevers
  • One point load per span
• Floor Joist
  • Up to 3 spans with 2 cantilevers
  • Design with I-Joists
  • Two wall loads and one partially distributed load per span
  • Moment of Inertia increases for glued and screwed plywood
  • Apply the code required concentrated load for commercial design
• Roof Rafter
  • Simple span with one cantilever eave
  • Design with I-Joists
  • Add peak and base notching calculations